All in One Tumbler Tool

 The best (in my opinion) tumbler marking and edging tool on the market. Use this to lay your decals or pinstriping straight AND trim and cut vinyl, painters tape, or electrical tape on your tumblers. Adjust the height of your blade SIMPLY AND QUICKLY. This all in one tool will easily hold a fine point sharpie or similar sized dry erase markers. It comes with a pencil insert as well as another insert for smaller pens or extra fine point sharpie/dry erase pens. The razor blade insert is used for your trimming and cutting needs. The list below are just some of the reasons you need this tool:

• Make perfect lines to lay your decals straight
• Make perfect lines to lay your pinstriping straight
• Trim your vinyl as low as 1/8" or as high as 5 3/4" (if you need higher, just flip your cup over)
• EASILY adjust the height of your blade for trimming

This tool comes with 2 clamps, a pencil adapter, a pen adapter, and the blade adapter.

The clamps that come with the tool are 4" ratchet style clamps. They work for the majority of our customers workspaces However, if you have a table thicker than 3 inches, or that has an odd shape or lip on it, you may want to purchase the tool using our listing WITHOUT clamps so that you can purchase a different style clamp more suited to your space. Our listing All in One Tumbler Tool without clamps has additional information.

Tips & Tricks

Permanent marker will wipe off epoxied surfaces easily with alcohol, dry erase will wipe off un-sanded epoxied surfaces or most vinyl with just water and a paper towel.  

If using for pinstriping, you can either use a  color similar to your pinstriping, or be sure to lay pinstriping right next to your line so that you can just wipe it away. 

If marking your cup while still spray painted, I recommend using a pencil so that you can remove your marks. Permanent marker and Dry Erase do not wipe easily off bare paint.

If desired, you can place a small piece of a silicone mat between the clamp and your table for added grip.

Putting pressure on the back of your tool when using the blade attachment helps stabilize the tool if needed.

USE CAUTION when using the razor blade adaptor. It comes with a cap for safety but it is a razor blade and it IS SHARP. Use any necessary safety gear and use at your own risk. 

To change blade: With the safety cap on the blade, simply slide it out of the adapter. Put safety cap on a new blade and slide it into the adapter.

See videos for more information regarding this amazing tool.